CN EN

Products

CODE:
HPW562
Download
BOPP White 60/Acrylic C-01/WG80
USE:
Minimum labeling temp: 0℃
Service temp: -20℃~80℃ (24h after labeling)
Suitable for application of daily chemical label & food label.
Facestock has special soft pearly gloss, and excellent process performance.
Must test to confirm if used in small bottle label (diameter smaller than 30mm).
Contact us now
Detail
Application

Fulfill the requirement of RoHS, REACH, VOC

Minimum labeling temp: 0℃
Service temp: -20℃~80℃ (24h after labeling)

Suitable for application of daily chemical label & food label.

Facestock has special soft pearly gloss, and excellent process performance.

Must test to confirm if used in small bottle label (diameter smaller than 30mm).

Printing and processing

Suitable for conventional printing.
Control the viscosity of print ink, high contractility bring label crimp, causing the label detach from release paper or warp from label object.
Lest the pattern fades, printed label without film should try to avoid contact with solvents such as alcohol, isopropanol, gasoline, toluene, etc.
Sharp special die-cut knife for film is recommended.
Storage period and conditions

From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.
Facestock
A fine white BOPP film with special printability coating.
Indicator
Substance
Caliper
Parameter
43±5%
60±5%
Unit
g/㎡
μm
Method
ISO 536
ISO 534
Adhesive
General purpose acrylic adhesive of film
This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.
Indicator
Initial Tack
90°Peel Adhesion (20min)
Shear
Parameter
≥8
≥5
≥15
Unit
N
N/25mm
H
Method
FTM9,ss
FTM2,ss
FTM8,ss
Liner
Super calendered thick white glassine
Indicator
Substance
Caliper
Parameter
80±5%
67±5%
Unit
g/㎡
μm
Method
ISO 536
ISO 534
Statement
All the statements, tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products sold should be tested by the customer in the end-use environment to confirm compliance with the requirements of that environment and to determine which materials to purchase.
We reserve the rights of final explanation.