Application
Fulfill the requirement of ROHS, REACH, VOC
Minimum labeling temp: 0℃
Service temp: -20℃~80℃ (24h after labeling) Suitable for application of daily chemical label & food label.
Facestock has special soft pearly gloss, and excellent process performance.
Must test to confirm if used in small bottle label
(diameter smaller than 30mm).
Printing and processing
Suitable for conventional printing.
Control the viscosity of print ink. High contractility will cause the label to curl, resulting in detachment from the liner or warping on the affixed object.
Lest the pattern fades, printed label without film should try to avoid contact with solvents such as alcohol, isopropanol, gasoline, toluene, etc.
Sharp special die-cut knife for film is recommended.
Storage period and conditions
From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%.
Prolonged storage outside these conditions might reduce the shelf life.
Facestock
A fine White BOPP film with special printability coated.
Adhesive
General purpose acrylic adhesive of film
This adhesive complies with FDA section 21 (175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.
Indicator
Initial Tack
90°Peel Adhesion (20min)
Shear
Liner
Super calendered white glassine
Statement
All the statements, tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products sold should be tested by the customer in the end-use environment to confirm compliance with the requirements of that environment and to determine which materials to purchase.We reserve the rights of final explanation.